When using rough terrain scissor lifts, it is really important to utilize extra care and be fully aware of your environment so as to be safe. The extended booms on the equipment act as levers from the center of the drive unit. Like for example, a 6 inch bump can lead to a 3 foot bounce when the operator is at the driver controls. Take into consideration all other traffic nearby, because they might not know that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface which has no water or mud. These areas conceal deep potholes which can be probably cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, extended completely. Be sure to just utilize approved wooden chalk blocks.
Several lifts would operate from the end of the boom on a metal platform. Long booms act levers on the drive unit. While you are at the driver controls, a 6-inch bump could cause a 3-foot bounce. Be aware of all other traffic. They might not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas could cover deep potholes in which the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, completely. Place just approved wooden chalk blocks under the outrigger pads in order to prevent the unit from moving.
A serious danger for lift drivers is overhead power lines. This is due no matter what kind of lift is utilized. For example, if the driver of the platform is not being aware, or if the platform is being controlled by ground workers which is not able to correctly access proximity to wiring and thus, either the platform itself or the worker could be easily brought into contact with electrical wires. The worker might be electrocuted unfortunately unless correctly insulated.